Skip to main content

K28 firmware V39 20210607

1. Upgrade content​

  1. Optimize the transmission algorithm of PlayStation4, Switch and PC;
  2. Add 2 Switch custom layouts, enter the settings through the combination key B44+B17, B44+B18.
  3. Under 1 Switch, two K28 can be connected at the same time;
  4. Add 2 custom layouts to Steam, which can be supported as PlayStation DS4. Enter the settings through the combination key B44+B13, B44+B14.
    • The custom layout is empty, you need to customize all the key values, please customize according to your favorite game.
    • In the settings section, you need to turn on support for PlayStation DS4 Configuration.
  5. For keyboard layout, the reporting rate is changed to 1ms;
  6. Optimize the LED lighting algorithm to solve the occasional unstable reporting rate caused by IC overheating;
  7. Provide 2 firmware versions.
    • The reporting rate of PlayStation4 is 1ms, and the reporting rate of Switch is 1ms (this speed is the limit of the console, which may cause key leakage, but it is only possible. We have not found it during our testing. If you find it, please use the 4ms version firmware. If there are still missing keys, please contact us by email)
    • PlayStation4 report rate is 4ms, Switch report rate is 4ms (DUALSHOCK 4 and Switch pro Controller report rate is stable)
  8. Optimize support for audio.

2. Firmware Download​

Download firmware
FirmwareComment
K28_HOST_MCU_V39_4ms.binRecommend this. Playstation 4 and Switch use 4ms report, keyboard layout 1ms report.
K28_HOST_MCU_V39_1ms.binPlaystation 4 and Switch use 1ms report, keyboard layout 1ms report. You can try this, if work not well, please use 4ms firmware.

3. How to update​

  1. Unplug USB of K28, push B42+B44 at same time and hold them, plug USB of K28. After 2 seconds, release B42+B44.
  2. Unzip the package. Open Update V1.1.exe file, click connect button. If connect button is green, the connection of K28 is OK. If not, please retry action 1.
  3. Click Open files button, select the target firmware file xxxx.bin.
  4. Click the Update button.
  5. Waiting for the progress bar to finish. Replug the USB of K28.
  6. Done.

4. Q&A​